Salta al contenuto principale

Introduzione

You can use this method if you can't eject the stuck disk by the eject button and the eject hole. The PS3 slim on this video is model CECH-300X.

Full video you can see here:

More info about disassembling, you can find in PlayStation 3 Slim Teardown

Panoramica Video

  1. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.
    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

  2. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.
    • Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.

  3. Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora

    Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora
  4. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.
    • First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.

  5. In this case we have ... 4x disks. :) .
    • In this case we have ... 4x disks. :)

    • .

    • Did you do it successfully?

  6. Test the console before assembling. And don't forget to put the spindle disc magnet. Test the console before assembling. And don't forget to put the spindle disc magnet.
    • Test the console before assembling. And don't forget to put the spindle disc magnet.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 14 persone hanno completato questa guida.

ZFix

Membro da: 09/12/2013

166.266 Reputazione

305 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

287 Membri

819 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 25

Ultimi 30 Giorni: 156

Tutti i Tempi: 12,800