Introduzione

PlayStation 3 - How to replace Laser Lens and Mechanism (Laser Deck).


Please SUBSCRIBE to my channel ツ


More info about disassembling, you can find in

PlayStation 3 Slim Teardown

Panoramica Video

  1. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.
    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

  2. Remove Power Supply. Remove Power Supply. Remove Power Supply.
    • Remove Power Supply.

  3. Separate cables, unscrew the screw and remove the Blu Ray drive. Separate cables, unscrew the screw and remove the Blu Ray drive. Separate cables, unscrew the screw and remove the Blu Ray drive.
    • Separate cables, unscrew the screw and remove the Blu Ray drive.

  4. Spedizione gratuita per tutti gli ordini superiori a 100,00 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio

    Mai riparato qualcosa? Questo è Genio.

    Condividi la tua storia di riparazione con #ImAGenius

    Siamo tutti Geni

    Condividi la tua storia di riparazione con #ImAGenius

  5. Disassemble the upper metal shield. . Please SUBSCRIBE to my channel  ツ
  6. Remove the two very small phillips screws in each lower corner referenced by the red circles. Remove the two very small phillips screws in each lower corner referenced by the red circles. Remove the two very small phillips screws in each lower corner referenced by the red circles.
    • Remove the two very small phillips screws in each lower corner referenced by the red circles.

  7. Be careful with flex cables. Be careful with flex cables. Be careful with flex cables.
    • Be careful with flex cables.

  8. Now you can remove the Laser Deck. Now you can remove the Laser Deck. Now you can remove the Laser Deck.
    • Now you can remove the Laser Deck.

  9. Transfer two flex cables and 2x rubbers. Transfer two flex cables and 2x rubbers. Transfer two flex cables and 2x rubbers.
    • Transfer two flex cables and 2x rubbers.

  10. You can test the console before full assembling. . Did you do it successfully?
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 12 persone hanno completato questa guida.

ZFix

Membro da: 09/12/2013

162.554 Reputazione

304 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

280 Membri

784 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 88

Ultimi 30 Giorni: 223

Tutti i Tempi: 16,102