Introduzione

If you want to replace the fan or clean the fan system - video tutorial:

Panoramica Video

  1. Disconnect the fan cable and remove the nine screws from the bottom side. Disconnect the fan cable and remove the nine screws from the bottom side. Disconnect the fan cable and remove the nine screws from the bottom side.
    • Disconnect the fan cable and remove the nine screws from the bottom side.

  2. Remove the two heat sink clamps and bottom shield, then gently separate  the motherboard off the top shield. Remove the two heat sink clamps and bottom shield, then gently separate  the motherboard off the top shield. Remove the two heat sink clamps and bottom shield, then gently separate  the motherboard off the top shield.
    • Remove the two heat sink clamps and bottom shield, then gently separate the motherboard off the top shield.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Remove the four Phillips screws and lift the top shield. Remove the four Phillips screws and lift the top shield. Remove the four Phillips screws and lift the top shield.
    • Remove the four Phillips screws and lift the top shield.

  5. That's all. That's all. That's all.
    • That's all.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

ZFix

Membro da: 09/12/2013

163.516 Reputazione

304 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

285 Membri

800 Guide realizzate

Awesome guide. Thank you so much. I did it, but now I just wonder what that white stuff was when I removed the motherboard. I think it's that thermal stuff people have been talking about and I suppose I have to replace that. I also hope that it's the fan that is what's causing my PS3 to say that it's overheating and shut off. I'm so glad you guys posted this. Great job. I rather do it myself than pay Sony an arm and a leg. Cheers!

chetacheez - Replica

This is CPU / GPU thermal paste / compound. I recommend you Arctic MX-2, MX-4. It is very good and not expensive.

ZFix -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 20

Ultimi 30 Giorni: 97

Tutti i Tempi: 8,134