Salta al contenuto principale

Introduzione

Use this guide to replace your base unit's motherboard.

Parti

Nessuna parte specificata.

  1. Flip over the base unit to reveal the bottom. Flip over the base unit to reveal the bottom.
    • Flip over the base unit to reveal the bottom.

  2. Using a #0 screwdriver, remove the two 2.50mm screws. Using a #0 screwdriver, remove the two 2.50mm screws.
    • Using a #0 screwdriver, remove the two 2.50mm screws.

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Separate, but do not remove, the silver upper piece from the dark lower piece. Carefully disconnect the wires from the motherboard. Remove the silver top of the base.
    • Separate, but do not remove, the silver upper piece from the dark lower piece.

    • Carefully disconnect the wires from the motherboard.

    • Remove the silver top of the base.

  5. Remove the motherboard from the base Remove the motherboard from the base Remove the motherboard from the base
    • Remove the motherboard from the base

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Bryan Clark

Membro da: 12/04/2012

44 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 17-29, Amido Spring 2012 Membro di Cal Poly, Team 17-29, Amido Spring 2012

CPSU-AMIDO-S12S17G29

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 6

Tutti i Tempi: 724