Introduzione

Sometimes, the O-ring seals in the Etha's bolt can get worn out and need to be replaced. Fortunately, Planet Eclipse designed this part of the marker to be taken apart and put back together with ease.

Parti

Using the 1/4" hex key, turn the bolt counterclockwise and remove.
  • Using the 1/4" hex key, turn the bolt counterclockwise and remove.

Aggiungi Commento

Slide the bolt tip and spring off of the main assembly.
  • Slide the bolt tip and spring off of the main assembly.

  • Keep a towel handy, you may get some grease on your hands.

Aggiungi Commento

  • Unscrew the casing from the rest of the bolt.

  • Again, you may get some grease on your hands during this step.

Aggiungi Commento

  • Grab the flat surface shown.

  • Unscrew this portion counter clockwise to remove it.

  • If you're having trouble unscrewing the part, try using a small wrench.

Aggiungi Commento

  • Grab the threaded cover and slide it away from the spring.

  • The bolt should now be in three pieces.

  • The threaded cover is the same part that you unscrewed in the last step.

Aggiungi Commento

  • Replace and lubricate the 9 marked O-rings.

  • O-ring removal will be explained in the next step.

Aggiungi Commento

  • Grab the O-ring on the sides.

  • Pinch the O-ring upwards to create a gap between the metal and the ring.

  • Use a small object to slip into the loop and pull the O-ring off gently.

  • We recommend using a small Allen Key for this.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

nicholasj6

Membro da: 14/10/2014

261 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 10-42, Amido Fall 2014 Membro di Cal Poly, Team 10-42, Amido Fall 2014

CPSU-AMIDO-F14S10G42

5 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 15

Tutti i Tempi: 1,193