Aggiusta la tua roba Comunità Store

Pioneer R1 Battery Replacement

Introduzione

This guide will demonstrate how to access and replace the R1's battery.

Cosa ti serve

  1. Pioneer R1 Battery Replacement, Battery: passo 1, immagine 1 di 1

    • Insert your plastic spudger into the opening near the HDMI port.

    • Gently pry the back cover of the R1 from the the front by using the spudger along the edges.

    • Do not pull the back cover straight off the R1 as components of the speakers will be attached to both sides.

    Modifica

  2. Pioneer R1 Battery Replacement: passo 2, immagine 1 di 1

    • Lay the R1 flat like an open book.

    • This will prevent the speakers from becoming disconnected from the motherboard.

    Modifica

  4. Pioneer R1 Battery Replacement: passo 3, immagine 1 di 1

    • Slide a strong thin object, like a thin spudger, between the battery and the display.

    • Slide the object along the length of the battery to remove it from the display.

    • The adhesive holding the battery in place is strong and the battery is quite soft. Take care not to break open the battery.

    • Disengage the battery cables from the motherboard.

    Modifica

  5. Pioneer R1 Battery Replacement: passo 4, immagine 1 di 1

    • Solder the black cable to the nodule labeled BAT+.

    • Solder the red cable to the nodule labeled BAT-.

    • Do not allow the solder from one nodule to touch the other, this may cause the battery to explode.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 773