Introduzione

Water damage or a faulty electrical component on the optical drive may prevent the Pioneer Elite Pro-R06U from properly displaying an image on the television. Replacement may be necessary to get the receiver back in working order.

Parti

Nessuna parte richiesta.

  1. Remove the two 6.4 mm Phillips screws on each side of the device's casing.
    • Remove the two 6.4 mm Phillips screws on each side of the device's casing.

    Aggiungi Commento

  2. Remove the two 6.5 mm Phillips screws on the back of the device casing.
    • Remove the two 6.5 mm Phillips screws on the back of the device casing.

    Aggiungi Commento

    • Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

    Aggiungi Commento

    • Remove the optical drive cooling fan by gripping the ribbon connector at M11 and gently remove by pulling away from the slot.

    Aggiungi Commento

    • Flip the latch on the ribbon connector upward to allow for cable removal.

    • Grip the ribbon cable and remove by gently pulling away from the unlatched connector.

    Aggiungi Commento

    • Remove the two 6.4 mm Phillips mounting screws on the optical drive cooling fan.

    Aggiungi Commento

    • Grip the frame of the cooling fan and slide it toward the front panel, then lift out of the device.

    Aggiungi Commento

    • Unplug ribbon cables D4 and D5. To unplug D4, flip the gate up and pull the ribbon away.

    Aggiungi Commento

    • Remove four 1/4th inch Phillips screws on the back of the casing.

    • Unscrew and remove the nut from the threaded connector.

    Aggiungi Commento

    • The optical drive is still connected by a cable on its bottom side, lift the drive upwards only slightly when first removing from the casing.

    • Pull the optical drive toward the interior of the device and then lift upwards, then pull to remove the cord on the bottom left corner before removing the drive completely.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Cody Carter

Membro da: 30/01/2018

1.049 Reputazione

6 Guide realizzate

Team

Baylor, Team S1-G5, Johnson Spring 2018 Membro di Baylor, Team S1-G5, Johnson Spring 2018

BU-JOHNSON-S18S1G5

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 8

Tutti i Tempi: 61