Aggiusta la tua roba Comunità Store

Pioneer A1 XW-SMA1-K Back Panel Replacement

Introduzione

If you are looking to replace the back panel of your Pioneer A1 XW-SMA1-K, here is your replacement guide.

Cosa ti serve

  1. Pioneer A1 XW-SMA1-K Back Panel Replacement, Back Panel: passo 1, immagine 1 di 1

    • Use the spudger to remove the mesh front panel.

    Modifica

  2. Pioneer A1 XW-SMA1-K Back Panel Replacement: passo 2, immagine 1 di 2 Pioneer A1 XW-SMA1-K Back Panel Replacement: passo 2, immagine 2 di 2

    • Use a Phillips #1 screwdriver to remove the thirteen 12 mm screws in the speaker frame.

    • Remove the speaker frame by pulling vertically upwards revealing the motherboard.

    Modifica

  4. Pioneer A1 XW-SMA1-K Back Panel Replacement: passo 3, immagine 1 di 3 Pioneer A1 XW-SMA1-K Back Panel Replacement: passo 3, immagine 2 di 3 Pioneer A1 XW-SMA1-K Back Panel Replacement: passo 3, immagine 3 di 3

    • Use a Phillips #1 screwdriver to remove the twelve 12 mm screws from the middle frame.

    • Remove the middle frame by pulling upward and vertically.

    Modifica

  5. Pioneer A1 XW-SMA1-K Back Panel Replacement: passo 4, immagine 1 di 2 Pioneer A1 XW-SMA1-K Back Panel Replacement: passo 4, immagine 2 di 2

    • Use the Phillips #1 screwdriver to remove the nine 12 mm screws from the motherboard.

    • Flip the motherboard over.

    • Remove the motherboard by detaching the antenna.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 14

Tutti i Tempi: 641