Salta al contenuto principale

Photive Artisan Portable Bluetooth Speaker Front Panel Replacement

Cosa ti serve

  1. Photive Artisan Portable Bluetooth Speaker Front Panel Replacement, Front Panel: passo 1, immagine 1 di 1
    • Before continuing, be sure your device is powered off.

    • Remove two 9mm Phillips #0 head screws from the bottom side of the speaker.

  2. Photive Artisan Portable Bluetooth Speaker Front Panel Replacement: passo 2, immagine 1 di 1
    • Peel back the rubber feet from either side of the base.

  3. Photive Artisan Portable Bluetooth Speaker Front Panel Replacement: passo 3, immagine 1 di 1
    • Remove four 9mm Phillips #0 head screws from the bottom of the speaker.

  4. Photive Artisan Portable Bluetooth Speaker Front Panel Replacement: passo 4, immagine 1 di 1
    • Separate the base of the speaker from the upper housing.

  5. Photive Artisan Portable Bluetooth Speaker Front Panel Replacement: passo 5, immagine 1 di 1
    • Remove four 9mm Phillips #0 head screws from the inside of the speaker case.

  6. Photive Artisan Portable Bluetooth Speaker Front Panel Replacement: passo 6, immagine 1 di 3 Photive Artisan Portable Bluetooth Speaker Front Panel Replacement: passo 6, immagine 2 di 3 Photive Artisan Portable Bluetooth Speaker Front Panel Replacement: passo 6, immagine 3 di 3
    • Remove all cable connectors from the speaker motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

David Lennon

Membro da: 04/14/15

9.944 Reputazione

10 Guide realizzate

Team

Cal Poly, Team 4-5, Maness Spring 2015 Membro di Cal Poly, Team 4-5, Maness Spring 2015

CPSU-MANESS-S15S4G5

4 Membri

45 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 2

Tutti i Tempi: 448