Salta al contenuto principale

Introduzione

This is a prerequisite only guide. Make sure your toothbrush is unplugged from the charger before beginning the disassembly. Also use caution while using any metal tools. This is too avoid electric shock. This is guide is used for the disassembly for the Philips Sonicare 2 series toothbrush.

  1. Remove brush on top of device.
    • Remove brush on top of device.

  2. Remove the 12 mm T8 Torx screw from the bottom of the toothbrush. After removing the screw, pry off the base with a plastic opening tool.
    • Remove the 12 mm T8 Torx screw from the bottom of the toothbrush. After removing the screw, pry off the base with a plastic opening tool.

  3. Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now

    Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now
  4. Remove the internal electronic mechanism from the housing by prying the red clips shown in the figure. This removes the charging port. Be very careful not to damage the charging port during this step.  Otherwise you will have to solder this part back to the device as shown in the second figure.
    • Remove the internal electronic mechanism from the housing by prying the red clips shown in the figure. This removes the charging port.

    • Be very careful not to damage the charging port during this step. Otherwise you will have to solder this part back to the device as shown in the second figure.

  5. Next you will be able to remove the internal electronic mechanism as shown in the figure.
    • Next you will be able to remove the internal electronic mechanism as shown in the figure.

  6. Remove the white battery cover as shown in the figure.
    • Remove the white battery cover as shown in the figure.

  7. Remove the white circuit board cover as shown. This cover will require you to pry off the piece from the groves .
    • Remove the white circuit board cover as shown. This cover will require you to pry off the piece from the groves .

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jonathan Jarvis

Membro da: 01/04/2016

452 Reputazione

4 Guide realizzate

Team

IUPUI, Team S6-G2, Baechle Fall 2017 Membro di IUPUI, Team S6-G2, Baechle Fall 2017

IUPUI-BAECHLE-F17S6G2

3 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 42