Philips Satinelle On/Off Switch Replacement

Introduzione

If the epilator is plugged in and the on/ off button does not seem to be working, the switch may be in the wrong position. This guide will help you replace the switch and make sure it is in its right position for the epilator to turn on.

Cosa ti serve

Passo 1 Plastic Cover

Philips Satinelle On/Off Switch Replacement, Plastic Cover: passo 1, immagine 1 di 3

Philips Satinelle On/Off Switch Replacement, Plastic Cover: passo 1, immagine 2 di 3

Philips Satinelle On/Off Switch Replacement, Plastic Cover: passo 1, immagine 3 di 3

Remove the head by pushing it to the right.

Traduci

Passo 2

Use a metal spudger to pry open the casing.
Caution: The epilator's internal components could be damaged if you shove the spudger in too far.

Traduci

Passo 3

Pull the plastic casing apart with your hands.
The plastic tab connecting the cover is likely going to break when you pull the device apart. This will not affect the operation of the epilator.

Traduci

Passo 4 On/Off Switch

Philips Satinelle On/Off Switch Replacement, On/Off Switch: passo 4, immagine 1 di 1

Remove the green board and the black socket.

Traduci

Passo 5

Slide the switch down toward the socket.

Traduci

Passo 6

Philips Satinelle On/Off Switch Replacement: passo 6, immagine 3 di 3

Put the components back into the frame
If the switch won't line up with the plastic square, make sure the large switch on the front of the operator is in the "off" position.

Traduci