Salta al contenuto principale

Pebble Steel Watch Band Replacement

Cosa ti serve

  1. Pebble Steel Watch Band Replacement, Watch Band: passo 1, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Flathead 1.5 mm Screwdriver
    $5.49
    Compra
    • Place the watch on its side to expose the side pins.

    • Use a 1.5 mm flathead screwdriver to unscrew the pin that is holding the band.

  2. Pebble Steel Watch Band Replacement: passo 2, immagine 1 di 1
    • Pull the pin out to remove the band.

  3. Pebble Steel Watch Band Replacement: passo 3, immagine 1 di 1
    • Turn the watch to the other side and repeat steps 1 and 2 to remove the other band.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

MTS

Membro da: 10/01/15

877 Reputazione

2 Guide realizzate

Team

USF Tampa, Team 1-7, Leahy Fall 2015 Membro di USF Tampa, Team 1-7, Leahy Fall 2015

USFT-LEAHY-F15S1G7

3 Membri

5 Guide realizzate

Un commento

One of my Pebble Steel pins comes out just as expected, but the other just spins, and doesn’t come out. Any ideas?

Christopher - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 8

Tutti i Tempi: 2,290