Salta al contenuto principale

Parrot FLYPAD Joystick Replacement

Cosa ti serve

  1. Parrot FLYPAD Joystick Replacement, Joystick: passo 1, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Magnetic Project Mat
    $19.95
    Compra
    • Total of 6 Screws are located in the back of the controller.

    • Four 0.9mm T6 screws

    • Two 0.1mm T6 screws

    • Flip the Flypad over.

    • Remove the six screws using a T6 screwdriver.

    • Use a Magnetic Mat to prevent loss of screws. Set aside.

  2. Parrot FLYPAD Joystick Replacement: passo 2, immagine 1 di 1
    • Flip the Flypad over again and separate the front and back. Be sure to remove the foam adhesive that connects the front plate to the motherboard.

    • Be aware that the Buttons (L1,R1) may fall out. Remember to put them back in place during reassembly.

    • Use Ph0 tool to remove the screws holding the motherboard in place.

    • Gently remove the motherboard from the front plate.

  3. Parrot FLYPAD Joystick Replacement: passo 3, immagine 1 di 2 Parrot FLYPAD Joystick Replacement: passo 3, immagine 2 di 2
    • Pop the joysticks out by pulling gently.

  4. Parrot FLYPAD Joystick Replacement: passo 4, immagine 1 di 1
    • Unscrew and replace joystick caps for a more comfortable grip.

Conclusione

To reassemble your device, follow these instructions in reverse order.

HUY NGUYEN

Membro da: 04/10/17

376 Reputazione

3 Guide realizzate

Team

UW Tacoma, Team S3-G5, Liner Spring 2017 Membro di UW Tacoma, Team S3-G5, Liner Spring 2017

UWT-LINER-S17S3G5

5 Membri

3 Guide realizzate

2 Commenti

Do you know where I can find replacement joystick caps like the one shown in Step 4, please?

cbeilstein - Replica

Same question as above regarding joystick caps please

Alex - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 10

Tutti i Tempi: 694