Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the propeller removal tool (included with the Parrot Bebop Drone), line up the holes with the protruding screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While holding the propeller in place, rotate the tool counterclockwise until the screws are aligned with the holes on the propeller.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While gently pushing down on the arm of which the propeller is attached, pull the propeller up off the motor.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.