Salta al contenuto principale

Introduzione

Before replacing most other part on this device, the battery must be properly disconnected in order to continue on. This guide will teach you how to remove and replace the battery.

  1. Begin by removing the velcro strap around the battery. Begin by removing the velcro strap around the battery.
    • Begin by removing the velcro strap around the battery.

  2. While holding onto the nose, gently pull the battery away from the nose. While holding onto the nose, gently pull the battery away from the nose.
    • While holding onto the nose, gently pull the battery away from the nose.

  3. Once the battery is separated from the nose, push down on the connector and pull the battery away from the connector. Once the battery is separated from the nose, push down on the connector and pull the battery away from the connector. Once the battery is separated from the nose, push down on the connector and pull the battery away from the connector.
    • Once the battery is separated from the nose, push down on the connector and pull the battery away from the connector.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Nazar Savchuk

Membro da: 25/01/2017

279 Reputazione

2 Guide realizzate

Team

UW Tacoma, Team 1-3, Rose Winter 2017 Membro di UW Tacoma, Team 1-3, Rose Winter 2017

UWT-ROSE-W17S1G3

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 36

Tutti i Tempi: 3,612