Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

You will need a Phillips screwdriver to remove the screws from the back of the phone, and a spudger to pry the plastic pieces from each other.

Parti

Nessuna parte specificata.

  1. Remove the battery.
    • Remove the battery.

    • Remove four Phillips screws.

  2. Pry up the plastic layer with a plastic opening tool.
    • Pry up the plastic layer with a plastic opening tool.

    • NOTE: Be careful that you do not separate the two plastic parts completely they are fragile and may break if pulled too hard.

  3. Slide out the keyboard carefully in between the two layers.
    • Slide out the keyboard carefully in between the two layers.

  4. Insert the new keyboard in between the two layers carefully.
    • Insert the new keyboard in between the two layers carefully.

  5. Check if the edges are perfectly aligned between the two plastic layers after you insert the keyboard.
    • Check if the edges are perfectly aligned between the two plastic layers after you insert the keyboard.

  6. Press the two plastic layers back together.
    • Press the two plastic layers back together.

    • Reinsert the four screws and place the battery and cover back.

Conclusione

You now have a new keyboard.

Altre 2 persone hanno completato questa guida.

Richard

Membro da: 13/02/2014

116 Reputazione

1 Guida realizzata

Team

Ohio State, Team 1-4, Meza Spring 2014 Membro di Ohio State, Team 1-4, Meza Spring 2014

OSU-MEZA-S14S1G4

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 206