Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide will show you how to add or replace the RAM in your Toughbook CF-29.

Parti

Nessuna parte specificata.

  1. Locate the bay door for the battery on the left side of the laptop.
    • Locate the bay door for the battery on the left side of the laptop.

  2. Slide the latch to the right and then down to unlock it. Pull out the battery.
    • Slide the latch to the right and then down to unlock it.

    • Pull out the battery.

  3. Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.
    • Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.

  4. Pull the clips aside to release and remove the RAM.
    • Pull the clips aside to release and remove the RAM.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Devon Augustus

Membro da: 12/04/2010

100 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 27-93, Amido Spring 2010 Membro di Cal Poly, Team 27-93, Amido Spring 2010

CPSU-AMIDO-S10S27G93

4 Membri

24 Guide realizzate

Thanks for sharing this. I just bought a panasonic toughbook from http://buytough.com and I think this will come in handy. :)

Katie Sutton - Replica

there is another ram slot you failed to mention

sparkynaz - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 33

Tutti i Tempi: 17,895