Aggiusta la tua roba Comunità Store

Panasonic Lumix DMC-FH20 LCD Screen Replacement

Introduzione

If your LCD screen is broken, follow this guide to replace it. You will need special tools in order to complete this replacement. Refer to the tools to be sure of what you need.

Cosa ti serve

  1. Panasonic Lumix DMC-FH20 LCD Screen Replacement, LCD Screen: passo 1, immagine 1 di 3 Panasonic Lumix DMC-FH20 LCD Screen Replacement, LCD Screen: passo 1, immagine 2 di 3 Panasonic Lumix DMC-FH20 LCD Screen Replacement, LCD Screen: passo 1, immagine 3 di 3

    • Remove all screws (Phillips #000 head) from the sides and bottom of the camera.

    Modifica

  2. Panasonic Lumix DMC-FH20 LCD Screen Replacement: passo 2, immagine 1 di 1

    • Remove the back panel. This might require some extra force. If you still can't get the panel off, try to use a plastic opening tool.

    Modifica

  4. Panasonic Lumix DMC-FH20 LCD Screen Replacement: passo 3, immagine 1 di 2 Panasonic Lumix DMC-FH20 LCD Screen Replacement: passo 3, immagine 2 di 2

    • Remove the circuit board. You should be able to do this with your fingers. Just grab it and pull upwards. If it does not come, use a plastic opening tool to help.

    Modifica

  5. Panasonic Lumix DMC-FH20 LCD Screen Replacement: passo 4, immagine 1 di 2 Panasonic Lumix DMC-FH20 LCD Screen Replacement: passo 4, immagine 2 di 2

    • Remove the white plastic cover. This may take some extra force. You will want to try to remove from the bottom side first and peel up.

    • Then, where the silver switch is located, it will slide directly out at the top.

    Modifica

  6. Panasonic Lumix DMC-FH20 LCD Screen Replacement: passo 5, immagine 1 di 1

    • Unscrew one screw (Phillips #000 head).

    Modifica

  7. Panasonic Lumix DMC-FH20 LCD Screen Replacement: passo 6, immagine 1 di 3 Panasonic Lumix DMC-FH20 LCD Screen Replacement: passo 6, immagine 2 di 3 Panasonic Lumix DMC-FH20 LCD Screen Replacement: passo 6, immagine 3 di 3

    • You will want to use a plastic opening tool to complete this step. Pop the thin black piece of plastic upwards with the opening tool to unlock the plastic film ribbon.

    • Once unlocked, you will be able to pull the ribbon out and remove the screen completely.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 1 altro collaboratore

Arianna Boushell

Membro da: 01/24/17

626 Reputazione

5 Guide realizzate

Distintivi: 13

+10 altri distintivi

Team

Cal Poly, Team 10-7, Banghart Winter 2017 Membro di Cal Poly, Team 10-7, Banghart Winter 2017

CPSU-BANGHART-W17S10G7

3 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 13

Tutti i Tempi: 548