Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Panasonic Lumix DMC-F7 Replacing Back Case Replacement

Introduzione

Steps for removing the back half of the case and replacing it with a new one.

Cosa ti serve

  1. Panasonic Lumix DMC-F7 Replacing Back Case Replacement, Battery: passo 1, immagine 1 di 1

    • Slide the lock switch to the right so that it is in the unlocked position.

    • Use your finger to slide the battery hatch in the direction of the downward arrow so that the hatch is open.

    • Both battery and memory card should now be visible.

    Traduci

  2. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 2, immagine 1 di 1

    • Open the battery hatch and then the black cover to expose the battery compartment.

    • The camera used to create these repair guides did not have a battery and memory card.

    • Remove the battery.

    • When installing the new battery, ensure it is in the same orientation as before.

    Traduci

  3. Panasonic Lumix DMC-F7 Replacing Back Case Replacement, Replacing Back Case: passo 3, immagine 1 di 1

    • Remove the two 2.8 mm Phillips screws as shown in picture.

    Traduci

  5. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 4, immagine 1 di 1

    • Using a Philips Screw Driver, remove the three 2.8 mm Phillips screws on the bottom of the camera as shown in picture.

    Traduci

  6. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 5, immagine 1 di 1

    • Remove the two 2.8 mm Phillips screws on the side of the camera as shown in picture.

    Traduci

  7. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 6, immagine 1 di 2 Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 6, immagine 2 di 2

    • Use a spudger to pry open the case from all sides.

    Traduci

  8. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 7, immagine 1 di 2 Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 7, immagine 2 di 2

    • Beware of the ribbon cable that is still attached when opening.

    • Use your fingers to carefully pry off the back casing from the camera assembly.

    Traduci

  9. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 8, immagine 1 di 1

    • Lay the camera on its front side. Then, use the Spudger to open the film strip locking mechanism and remove strip./No edits necessary.

    • Hold down on the camera's metal casing with one hand. Using your other hand, completely lift the back case off the rest of the camera, making sure the film strip separates./Make a picture for this step.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 14 altri collaboratori

Alex Penman

Membro da: 01/28/11

463 Reputazione

4 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team 7-35, Regan Winter 2011 Membro di Cal Poly, Team 7-35, Regan Winter 2011

CPSU-REGAN-W11S7G35

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 3

Tutti i Tempi: 894