Salta al contenuto principale

Panasonic HDC-TM15 Side Cover Replacement

Cosa ti serve

  1. Panasonic HDC-TM15 Side Cover Replacement, Side Cover: passo 1, immagine 1 di 1
    • Using the Phillips #00 Screwdriver, unscrew the five .5 mm Phillips #00 screws on the hand-strap side of the camcorder.

  2. Panasonic HDC-TM15 Side Cover Replacement: passo 2, immagine 1 di 1
    • Next, unscrew the six .5 mm Phillips #00 screws on the bottom of the camcorder.

  3. Panasonic HDC-TM15 Side Cover Replacement: passo 3, immagine 1 di 3 Panasonic HDC-TM15 Side Cover Replacement: passo 3, immagine 2 di 3 Panasonic HDC-TM15 Side Cover Replacement: passo 3, immagine 3 di 3
    • By putting your hand through the hand-strap, tug on the side cover until it comes off completely.

    • Once the old cover is completely detached, set it aside.

    • The inside of your camcorder should now be completely exposed, as seen in the photos.

  4. Panasonic HDC-TM15 Side Cover Replacement: passo 4, immagine 1 di 2 Panasonic HDC-TM15 Side Cover Replacement: passo 4, immagine 2 di 2
    • Line up the new side cover in the exact same place, ensuring that the screw holes match.

    • Re-screw the side cover into place.

  5. Panasonic HDC-TM15 Side Cover Replacement: passo 5, immagine 1 di 1
    • Gently tug on the hand-strap to ensure that the screws are tight and the side cover is secure.

    • When the side cover is securely fastened, you have completed the side cover replacement of your Panasonic HDC-TM15 camcorder.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Tricia Fallo

Membro da: 03/11/15

210 Reputazione

2 Guide realizzate

Team

Marist, Team 1-4, Laflen Spring 2015 Membro di Marist, Team 1-4, Laflen Spring 2015

MARS-LAFLEN-S15S1G4

3 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 301