Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Eject the disk tray from the DVD player before removing power supply.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Evenly lift upward on the disk tray front cover (not slanted, as pictured). This will allow for easier disassembly of the player.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the three screws running along the back edge of case cover.
-
Remove the two screws from each side of the case cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Grab edges of the cover with your hands. Pull outward slightly, then straight up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift up the five tabs securing the front panel to the chassis. There are three on the bottom, and two on the inside edges of the panel. Panel should then lift off the player.
-