Introduzione

Is your shaver not working even when its batteries have been replaced? if so, here is the guide to fix the problem by replacing the motor. All you need is a standard Phillips Screwdriver to remove two screws during the replacement.

Twist the release cap  to expose the batteries.
  • Twist the release cap to expose the batteries.

Aggiungi Commento

Remove the batteries
  • Remove the batteries

Aggiungi Commento

  • Remove the razor guard by pushing its release buttons and pulling.

Aggiungi Commento

  • Carefully pull out the inner blades.

Aggiungi Commento

  • Remove the two 1.9mm Phillips #0 screws from the inner blades.

Aggiungi Commento

  • Remove the metal plate.

Aggiungi Commento

  • Pull the outer casing with one hand while holding the inner battery casing with the other hand.

Aggiungi Commento

  • Detach the white plastic blade base from the tip of the motor by pulling it.

Aggiungi Commento

  • Detach motor from gray plastic holder by pulling it.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

muhammad samsulsham

Membro da: 21/05/2018

253 Reputazione

2 Guide realizzate

Team

IUPUI, Team S1-G5, Harley Spring 2018 Membro di IUPUI, Team S1-G5, Harley Spring 2018

IUPUI-HARLEY-S18S1G5

6 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 70