Panasonic Camera DMC FX37 Battery Door Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

This guide will show you how to replace the door covering the battery compartment. Overall this guide does not take much knowledge regarding disassembly, however you should take care to remember how the parts are situated before removing them.

Cosa ti serve

Passo 1 Battery Door

Panasonic Camera DMC FX37 Battery Door Replacement, Battery Door: passo 1, immagine 1 di 2

Panasonic Camera DMC FX37 Battery Door Replacement, Battery Door: passo 1, immagine 2 di 2

Set the switch on the battery door to "open," and open the door.

Traduci

Passo 2

At the left hand side, locate the head of the metal bar that holds the spring in place.

Traduci

Passo 3

Push the metal bar down using the metal tweezers.

Traduci

Passo 4

Pull the metal bar that holds the spring in place out.
You can also use tweezers for this step, although we found it easier to just use our fingers.

Traduci

Passo 5

Remove the battery access door from the device.
In order to keep the "springiness" of the door, be sure that the long arm of the spring is not over the hole for the battery.

Traduci