Introduzione

This guide will show you how to replace the door covering the battery compartment. Overall this guide does not take much knowledge regarding disassembly, however you should take care to remember how the parts are situated before removing them.

Parti

Nessuna parte richiesta.

  1. Set the switch on the battery door to "open," and open the door.
    • Set the switch on the battery door to "open," and open the door.

    Aggiungi Commento

  2. At the left hand side, locate the head of the metal bar that holds the spring in place.
    • At the left hand side, locate the head of the metal bar that holds the spring in place.

    Aggiungi Commento

  3. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
    • Push the metal bar down using the metal tweezers.

    Aggiungi Commento

    • Pull the metal bar that holds the spring in place out.

    • You can also use tweezers for this step, although we found it easier to just use our fingers.

    Aggiungi Commento

    • Remove the battery access door from the device.

    • In order to keep the "springiness" of the door, be sure that the long arm of the spring is not over the hole for the battery.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Zhentao

Membro da: 30/01/2018

229 Reputazione

2 Guide realizzate

Team

Baylor, Team S2-G3, Johnson Spring 2018 Membro di Baylor, Team S2-G3, Johnson Spring 2018

BU-JOHNSON-S18S2G3

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 38