Salta al contenuto principale

Palm m105 case replacment

Cosa ti serve

  1. Palm m105 case replacment, Palm m105 case replacment: passo 1, immagine 1 di 1
    • Remove the protective flip lid of the device. Open the lid and pull.

    • There are two clips that will pop out.

  2. Palm m105 case replacment: passo 2, immagine 1 di 1
    • Unclip the tab at the top of the device, to remove the face plate.

  3. Palm m105 case replacment: passo 3, immagine 1 di 1
    • Remove the batteries by opening the battery compartment on the back of the device.

    • Remove one battery at a time.

  4. Palm m105 case replacment: passo 4, immagine 1 di 2 Palm m105 case replacment: passo 4, immagine 2 di 2
    • Using a T-5 Torx screwdriver, remove all four screws at the back of the device by turning them counterclockwise. A sample screwdriver is located here.

  5. Palm m105 case replacment: passo 5, immagine 1 di 3 Palm m105 case replacment: passo 5, immagine 2 di 3 Palm m105 case replacment: passo 5, immagine 3 di 3
    • Remove the back and front cover from the interior parts of the device.

  6. Palm m105 case replacment: passo 6, immagine 1 di 1
Conclusione

To reassemble your device, follow these instructions in reverse order.

Travis

Membro da: 10/04/11

4 Reputazione

1 Guida realizzata

Team

UW Stout, Team 1-3, Zhou Fall 2011 Membro di UW Stout, Team 1-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G3

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 5

Tutti i Tempi: 771