Aggiusta la tua roba Comunità Store

Palm m105 Batteries Replacement

Introduzione

You will need to have a supply of AAA batteries for replacement. Can be found at most hardware and department stores. You can also order them online here

  1. Palm m105 Batteries Replacement, Batteries: passo 1, immagine 1 di 1

    • Press the latch on the battery door on the back of the device and pull outwards.

    • Back the device up if possible, you may lose all your data if there is no power for a little too long for it to retain it, make sure this is done quickly.

    Modifica

  3. Palm m105 Batteries Replacement: passo 2, immagine 1 di 1

    • Install two AAA alkaline batteries into the battery compartment, placing the positive and negative ends of the battery in the correct positions. (Shown as a diagram inside the battery compartment)

    • Make sure to remove one battery at a time and replace with fresh battery. This will retain information on the device.

    Modifica

  4. Palm m105 Batteries Replacement: passo 3, immagine 1 di 1

    • Place the battery door back into place on the back of the device; it will make a 'click' sound when properly reattached.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 6 altri collaboratori

Erik Thompson

Membro da: 10/04/11

31 Reputazione

5 Guide realizzate

Distintivi: 1

Team

UW Stout, Team 1-3, Zhou Fall 2011 Membro di UW Stout, Team 1-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G3

4 Membri

7 Guide realizzate

Un commento

"Moderate difficulty"?? There's only three steps and two of them involve removing and reinstalling the battery door.

Gene Merritt - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 1,226