Unscrew the two 7.35mm Torx T6 screws.
  • Unscrew the two 7.35mm Torx T6 screws.

Aggiungi Commento

Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.
  • Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.

Aggiungi Commento

  • Carefully remove the speaker from the back white cover by just pulling it gently. It is glued on.

Aggiungi Commento

  • Unscrew the #00 5.75mm Phillips screws from the bottom of the motherboard. The front blue panel should fall right off.

Aggiungi Commento

  • The blue keys will either come off with the blue front case, or stay on the motherboard.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Gabe

Membro da: 23/01/2011

501 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 5-21, Amido Winter 2011 Membro di Cal Poly, Team 5-21, Amido Winter 2011

CPSU-AMIDO-W11S5G21

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 475