Introduzione

Use this guide to replace a screen on a Palm Zire 21

Remove the two 0.8mm screws located on the back of the device.
  • Remove the two 0.8mm screws located on the back of the device.

Aggiungi Commento

  Using tweezers, or something similar flip up the tab, releasing the wires located under the flap
  •  Using tweezers, or something similar flip up the tab, releasing the wires located under the flap

Aggiungi Commento

  • Using a Philips head screwdriver, remove the two screws located at the bottom of the board.

Aggiungi Commento

  • Gently, remove the motherboard by lifting up exposing the screen.

Aggiungi Commento

  • Carefully, remove the screen from the device by lifting up and replacing with a new one.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 178