Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Palm Treo 700P Motherboard Replacement

Cosa ti serve

  1. Palm Treo 700P Motherboard Replacement, Battery: passo 1, immagine 1 di 3 Palm Treo 700P Motherboard Replacement, Battery: passo 1, immagine 2 di 3 Palm Treo 700P Motherboard Replacement, Battery: passo 1, immagine 3 di 3
    • Press the button located just above the Sprintâ„¢ logo and then slide the cover down.

  2. Palm Treo 700P Motherboard Replacement: passo 2, immagine 1 di 2 Palm Treo 700P Motherboard Replacement: passo 2, immagine 2 di 2
    • Use the small notch on the left hand side of the phone to remove the battery.

  3. Palm Treo 700P Motherboard Replacement, Back Case: passo 3, immagine 1 di 1
    • Remove the stylus from the phone.

  4. Palm Treo 700P Motherboard Replacement: passo 4, immagine 1 di 1
    • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

  5. Palm Treo 700P Motherboard Replacement: passo 5, immagine 1 di 1
    • Using the spudger, remove the small rubberized patch under the antenna.

  6. Palm Treo 700P Motherboard Replacement: passo 6, immagine 1 di 1
    • Unscrew the last two screws using the previous screw driver.

  7. Palm Treo 700P Motherboard Replacement: passo 7, immagine 1 di 2 Palm Treo 700P Motherboard Replacement: passo 7, immagine 2 di 2
    • Using the plastic opening tool, gently separate the back case from the phone body.

  8. Palm Treo 700P Motherboard Replacement, Motherboard: passo 8, immagine 1 di 3 Palm Treo 700P Motherboard Replacement, Motherboard: passo 8, immagine 2 di 3 Palm Treo 700P Motherboard Replacement, Motherboard: passo 8, immagine 3 di 3
    • Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3).

  9. Palm Treo 700P Motherboard Replacement: passo 9, immagine 1 di 3 Palm Treo 700P Motherboard Replacement: passo 9, immagine 2 di 3 Palm Treo 700P Motherboard Replacement: passo 9, immagine 3 di 3
    • Remove the antenna chip by unscrewing the two screws with Torx T-5 screwdriver (Picture 1).

    • Once unscrewed, gently detach the antenna chip with your hands (Picture 2).

  10. Palm Treo 700P Motherboard Replacement: passo 10, immagine 1 di 2 Palm Treo 700P Motherboard Replacement: passo 10, immagine 2 di 2
    • Use the plastic opening tool to unlock the tab holding the keyboard connection (Picture 1).

    • Once the keyboard connection is detached, use your hands to gently separate the motherboard from the back panel (Picture 2).

  11. Palm Treo 700P Motherboard Replacement: passo 11, immagine 1 di 3 Palm Treo 700P Motherboard Replacement: passo 11, immagine 2 di 3 Palm Treo 700P Motherboard Replacement: passo 11, immagine 3 di 3
    • To completely detach the motherboard from the back panel, use the plastic opening tool to unlock the LCD connection from the motherboard (Picture 2).

    • Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3).

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ivan

Membro da: 04/29/12

11 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 12-37, Regan Spring 2012 Membro di Cal Poly, Team 12-37, Regan Spring 2012

CPSU-REGAN-S12S12G37

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 792