Salta al contenuto principale

Palm Treo 600 Keyboard Replacement

Cosa ti serve

  1. Palm Treo 600 Keyboard Replacement, Back Case: passo 1, immagine 1 di 1
    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

  2. Palm Treo 600 Keyboard Replacement: passo 2, immagine 1 di 2 Palm Treo 600 Keyboard Replacement: passo 2, immagine 2 di 2
    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

  3. Palm Treo 600 Keyboard Replacement: passo 3, immagine 1 di 2 Palm Treo 600 Keyboard Replacement: passo 3, immagine 2 di 2
    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

  4. Palm Treo 600 Keyboard Replacement, Front Case: passo 4, immagine 1 di 2 Palm Treo 600 Keyboard Replacement, Front Case: passo 4, immagine 2 di 2
    • Using a T6 Torx Screwdriver, remove the two screws.

    • The motherboard will now be loose from the front case.

  5. Palm Treo 600 Keyboard Replacement, Keyboard: passo 5, immagine 1 di 1
    • Using the spudger, flip open the clasp that holds the data ribbon in place.

  6. Palm Treo 600 Keyboard Replacement: passo 6, immagine 1 di 1
    • Pull out the ribbon.

    • The keyboard will disconnect from the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 13-23, Maness Winter 2010 Membro di Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 Membri

16 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,484