Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Palm Pre Speaker Replacement

Cosa ti serve

  1. Palm Pre Speaker Replacement, Battery: passo 1, immagine 1 di 1
    • Make sure your Palm Pre is turned off before disassembling the phone.

    • Snap off the back panel to reveal the battery.

  2. Palm Pre Speaker Replacement: passo 2, immagine 1 di 1
    • Carefully pull up on the tab to remove the current battery.

  3. Palm Pre Speaker Replacement, Speaker: passo 3, immagine 1 di 2 Palm Pre Speaker Replacement, Speaker: passo 3, immagine 2 di 2
    • Use the t4 screwdriver to remove all 6 of the 3.6mm long screws.

  4. Palm Pre Speaker Replacement: passo 4, immagine 1 di 2 Palm Pre Speaker Replacement: passo 4, immagine 2 di 2
    • Use the spudger to locate the crease at the bottom of the keyboard.

    • Carefully work your way around the phone separating the back frame from the keyboard.

  5. Palm Pre Speaker Replacement: passo 5, immagine 1 di 1
    • Use tweezers to remove the DIV and GPS antennas from the back of the keyboard.

  6. Palm Pre Speaker Replacement: passo 6, immagine 1 di 1
    • Use the spuger to pry out the speaker. It is magnetically connected so do not be afraid to use the necessary force.

    • Make sure to take note of the orientation of the speaker for re-installation.

    • Make sure not the puncture the screen on the outside of the back frame.

Conclusione

To reassemble your device, follow these instructions in reverse order.

noha

Membro da: 04/12/12

139 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 7-31, Maness Spring 2012 Membro di Cal Poly, Team 7-31, Maness Spring 2012

CPSU-MANESS-S12S7G31

3 Membri

16 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,155