Introduzione

The following guide will show readers how to properly remove the keyboard from the Palm Pre 2.

  1. Make sure your Palm Pre 2 is turned off before taking apart the phone. Snap off the back panel to reveal the battery using the opening tool.
    • Make sure your Palm Pre 2 is turned off before taking apart the phone.

    • Snap off the back panel to reveal the battery using the opening tool.

  2. Pull on the tab to remove the battery. Pull on the tab to remove the battery.
    • Pull on the tab to remove the battery.

  3. Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place. Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place.
    • Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Use a spudger to open the hinge that covers the black and white GPS and DIV antennas. Use tweezers to remove the two antennas from the keypad control board.
    • Use a spudger to open the hinge that covers the black and white GPS and DIV antennas.

    • Use tweezers to remove the two antennas from the keypad control board.

  6. Use the opening tool to pry off the (black and yellow) back frame. Use the opening tool to pry off the (black and yellow) back frame.
    • Use the opening tool to pry off the (black and yellow) back frame.

  7. Use the opening tool to remove the panel on the main part of the phone. Use the tweezers to get access to remove the panel giving access to the cable connectors. Remove the two ribbon cable connectors using the tweezers.
    • Use the opening tool to remove the panel on the main part of the phone.

    • Use the tweezers to get access to remove the panel giving access to the cable connectors.

    • Remove the two ribbon cable connectors using the tweezers.

  8. Use tweezers to separate the keyboard from the phone.
    • Use tweezers to separate the keyboard from the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Elliott Van Hoy

Membro da: 22/01/2018

256 Reputazione

2 Guide realizzate

Team

IUPUI, Team S1-G6, Freund Spring 2018 Membro di IUPUI, Team S1-G6, Freund Spring 2018

IUPUI-FREUND-S18S1G6

2 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 66