Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

Installing a new motherboard assembly which contains the processor and software package.

Parti

Nessuna parte specificata.

  1. Place the Palm IIIx face down on a flat surface.
    • Place the Palm IIIx face down on a flat surface.

  2. Push down and lift up the battery cover to remove it.
    • Push down and lift up the battery cover to remove it.

  3. Remove the old batteries one at a time.
    • Remove the old batteries one at a time.

  4. Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.
    • Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.

  5. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  6. Hold the device on its side, positioning your hands as shown.
    • Hold the device on its side, positioning your hands as shown.

    • Remove the back cover by pushing in with your thumbs and pulling outward with the rest of your fingers.

  7. Hold the screen and front cover on its side, facing the screen inward as shown.
    • Hold the screen and front cover on its side, facing the screen inward as shown.

    • Remove the screen by pushing outward with your thumbs. Use your index fingers to hold the front cover in place.

  8. Position the device with the screen facing down. Locate the white ribbon wire on the left hand side of the device.
    • Position the device with the screen facing down.

    • Locate the white ribbon wire on the left hand side of the device.

    • On either side of the ribbon wire are two white clasps. Gently push the two clasps away from the board (to the left).

  9. Detach the ribbon wire by gently pulling it out of its connector.
    • Detach the ribbon wire by gently pulling it out of its connector.

  10. Separate the motherboard from the screen.
    • Separate the motherboard from the screen.

  11. Now the motherboard assembly can be replaced successfully.
    • Now the motherboard assembly can be replaced successfully.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Ben Johnson

Membro da: 26/01/2010

22 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 14-43, Regan Winter 2010 Membro di Cal Poly, Team 14-43, Regan Winter 2010

CPSU-REGAN-W10S14G43

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 2,790