Salta al contenuto principale
  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Press the button securing the battery door to the PSP 300xc, and lift the battery door off. Lift the battery out of the PSP.
    • Press the button securing the battery door to the PSP 300xc, and lift the battery door off.

    • Lift the battery out of the PSP.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use a spudger or your fingernail to remove the warranty sticker stuck to the inside of the battery tray
    • Use a spudger or your fingernail to remove the warranty sticker stuck to the inside of the battery tray

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove four Phillips screws from the back of the PSP. Remove four Phillips screws from the back of the PSP.
    • Remove four Phillips screws from the back of the PSP.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove two Phillips screws from the top of the PSP.
    • Remove two Phillips screws from the top of the PSP.

  5. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove a single screw from the bottom edge of the PSP.
    • Remove a single screw from the bottom edge of the PSP.

  6. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Insert a spudger between the front case and PSP, and slide the spudger along the perimeter of the front case to remove it. Insert a spudger between the front case and PSP, and slide the spudger along the perimeter of the front case to remove it.
    • Insert a spudger between the front case and PSP, and slide the spudger along the perimeter of the front case to remove it.

  7. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove a single Phillips screw securing the home bar to the PSP 300xc.
    • Remove a single Phillips screw securing the home bar to the PSP 300xc.

  8. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Push the home bar to the right about 1cm to release a tab, and begin to lift the right end of the home bar slightly. Do not attempt to remove the home bar yet, it is still attached to the PSP 300xc.
    • Push the home bar to the right about 1cm to release a tab, and begin to lift the right end of the home bar slightly.

    • Do not attempt to remove the home bar yet, it is still attached to the PSP 300xc.

  9. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Insert a spudger under the LCD, beside the black plastic tab.
    • Insert a spudger under the LCD, beside the black plastic tab.

    • Push the LCD to the left and pry up to release the left edge of the LCD from under the plastic tab.

  10. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Insert a spudger under the LCD, beside the black plastic tab.
    • Insert a spudger under the LCD, beside the black plastic tab.

    • Push the LCD to the right and pry up to release the right edge of the LCD from under the plastic tab.

  11. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Rotate the LCD away from the PSP to reveal the LCD and home bar ribbon cables. Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on the following four ZIF connectors: Home bar cable
    • Rotate the LCD away from the PSP to reveal the LCD and home bar ribbon cables.

    • Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on the following four ZIF connectors:

    • Home bar cable

    • Microphone cable

    • LCD display data cable

    • Touchscreen cable

    • Be sure you are prying up on the retaining flap, not the socket itself

    • After flipping up the locking tabs on all four connectors, use your fingers or a spudger to gently pull the cables straight out of the connectors.

  12. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Remove the LCD from the PSP 300xc.
    • Remove the LCD from the PSP 300xc.

Linea Traguardo

Altre 10 persone hanno completato questa guida.

Matthew Newsom

Membro da: 05/01/2010

36.345 Reputazione

67 Guide realizzate

the metal bar on the lcd of the revisioned 3000 is easily removable with a spudger while the first gen 3000s have metal bars like 2000s, repairing any psp 3000 brite units is the easiest one to repair among the 4 other models of psp

Ghost - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 11

Tutti i Tempi: 4,250