Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
-
Posiziona la PSP a faccia in giù, in modo che il lettore UMD sia rivolto verso l'alto.
-
Trova lo sportellino della batteria e aprilo.
-
Rimuovi la batteria dall'interno.
-
-
-
Trova l'adesivo nel vano batteria etichettato: "En: Warranty Void if Seal Damaged."
-
Rimuovi l'adesivo utilizzando gli strumenti di apertura PSP.
-
-
-
-
Rimuovi il tasto home sollevandolo a destra e a sinistra delicatamente con uno strumento di apertura. Togli il tasto dal dispositivo.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the opening tools to press the tab on the left-hand side of the speaker to release it.
-
Remove the speaker by twisting it counter-clockwise (to the left, like a screw).
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove two 4.5 mm Phillips screws from the left-hand side of the PSP.
-
Slide off the left trigger along with the plastic bracket underneath.
-
Carefully pry off left trigger button using opening tools.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use an opening tool to lift up the brown tab on the connector and remove the cable horizontally.
-
Gently remove the memory card slot by pulling it straight out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the following four connections:
-
Two ribbon cables -- flip up latch and remove horizontally.
-
One wire clamp -- use an opening tool to pry it up vertically.
-
One wiring harness -- use your fingers, a PSP opening tool, or tweezers to disconnect the connector horizontally.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove metal shields by gently lifting them with an opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using an opening tool, delicately raise the logic board from its base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the logic board out of the way, remove the 4mm Phillips screw.
-
Carefully lift the headphone jack out of the casing.
-
Carefully lift headphone jack out of casing.
-
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.