Aggiusta la tua roba Comunità Store

Oster Blend-N-Go My Blend Drinking Lid Seal Replacement

Introduzione

Use this guide to replace your old or damaged Drinking Lid Seal.

Cosa ti serve

  1. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Blender Bottle: passo 1, immagine 1 di 2 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Blender Bottle: passo 1, immagine 2 di 2

    • Grip the blender base with one hand and blender bottle with the other hand.

    • Rotate the blender bottle a quarter turn counterclockwise .

    • Lift the blender bottle out of the blender base. The blade assembly should still be attached to the blender bottle.

    Traduci

  2. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: passo 2, immagine 1 di 3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: passo 2, immagine 2 di 3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: passo 2, immagine 3 di 3

    • Grip the blade assembly with one hand and blender bottle with the other hand.

    • Rotate the blade assembly counterclockwise until it is completely unscrewed from the blender bottle.

    • Lift the blender bottle to separate it from the blade assembly.

    Traduci

  3. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Drinking Lid Assembly: passo 3, immagine 1 di 1

    • After removing the blade assembly from the blender bottle, ensure that your drinking lid assembly has its seal placed in the seal bed.

    Traduci

  5. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: passo 4, immagine 1 di 3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: passo 4, immagine 2 di 3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: passo 4, immagine 3 di 3

    • Grab the blender bottle with one hand and the drinking lid assembly with the other.

    • Place the drinking lid assembly onto the blender bottle and twist it clockwise until it is tight around the blender bottle.

    Traduci

  6. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Drinking Lid Seal: passo 5, immagine 1 di 1

    • After separating the drinking lid assembly from the blender bottle, position the plastic opening tool on either side of the seal in the drinking lid assembly.

    • Wedge the tool between seal and seal seat wall.

    Traduci

  7. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: passo 6, immagine 1 di 2 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: passo 6, immagine 2 di 2

    • Gently pry the seal up while lifting seal out of the seal seat.

    Traduci

  8. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: passo 7, immagine 1 di 2 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: passo 7, immagine 2 di 2

    • Press new seal into seal seat with finger.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Paul Long

Membro da: 08/27/15

710 Reputazione

4 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

USF Tampa, Team 12-6, Blackwell Fall 2015 Membro di USF Tampa, Team 12-6, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G6

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 12

Tutti i Tempi: 855