Aggiusta la tua roba Comunità Store

Oster BLSTSS-PZO Power Cord Replacement

Introduzione

The power cord is responsible for providing power to your device. This guide will instruct you on how to replace the power cord.

Cosa ti serve

  1. Oster BLSTSS-PZO Power Cord Replacement, Circuitboard: passo 1, immagine 1 di 1

    • Use the prying tools to open the four plastic screw holes on the bottom of the blender.

    Traduci

  2. Oster BLSTSS-PZO Power Cord Replacement: passo 2, immagine 1 di 1

    • Use the Phillips #1 Screwdriver to unscrew the four 16 mm screws and remove the plastic bottom.

    Traduci

  3. Oster BLSTSS-PZO Power Cord Replacement: passo 3, immagine 1 di 1

    • Gently remove the circuit board.

    Traduci

  5. Oster BLSTSS-PZO Power Cord Replacement: passo 4, immagine 1 di 2 Oster BLSTSS-PZO Power Cord Replacement: passo 4, immagine 2 di 2

    • Use the spudger to detach the black wire from the circuit board.

    • Repeat for yellow wire.

    Traduci

  6. Oster BLSTSS-PZO Power Cord Replacement: passo 5, immagine 1 di 3 Oster BLSTSS-PZO Power Cord Replacement: passo 5, immagine 2 di 3 Oster BLSTSS-PZO Power Cord Replacement: passo 5, immagine 3 di 3

    • Use the Phillips #1 to remove the four 8mm screws.

    • Use the medal spudger to detach the circuit board from the buttons.

    • Gently pull and release circuit board from buttons.

    Traduci

  7. Oster BLSTSS-PZO Power Cord Replacement, Power Cord: passo 6, immagine 1 di 3 Oster BLSTSS-PZO Power Cord Replacement, Power Cord: passo 6, immagine 2 di 3 Oster BLSTSS-PZO Power Cord Replacement, Power Cord: passo 6, immagine 3 di 3

    • Locate petal prong on the end of the power cord.

    • Bend metal prong until it's straight with your finger.

    Traduci

  8. Oster BLSTSS-PZO Power Cord Replacement: passo 7, immagine 1 di 2 Oster BLSTSS-PZO Power Cord Replacement: passo 7, immagine 2 di 2

    • Spring will pop out when you pull out metal prong

    • Pull prong out of the hole.

    Traduci

  9. Oster BLSTSS-PZO Power Cord Replacement: passo 8, immagine 1 di 3 Oster BLSTSS-PZO Power Cord Replacement: passo 8, immagine 2 di 3 Oster BLSTSS-PZO Power Cord Replacement: passo 8, immagine 3 di 3

    • Pinch plastic prongs on base of blender to remove plastic securing device.

    • Remove plastic securing device.

    • Pull power cord out of blender base.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 189