Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Oster 6329 Outer Shell Removal

Cosa ti serve

  1. Oster 6329 Outer Shell Removal, Outer Shell Removal: passo 1, immagine 1 di 2 Oster 6329 Outer Shell Removal, Outer Shell Removal: passo 1, immagine 2 di 2
    • Using the Phillips-head #2 screwdriver, unscrew the three 1cm Phillips-head screws on the plastic base of the toaster to separate the outer metal shell from the plastic base.

  2. Oster 6329 Outer Shell Removal: passo 2, immagine 1 di 1
    • Push the plastic push-down handle down and pull the plastic handle straight from metal arm.

  3. Oster 6329 Outer Shell Removal: passo 3, immagine 1 di 1
    • Loosen the outer metal shell from the plastic base by holding the plastic base while pulling up on the metal shell.

    • Only lift the outer shell a little so as not to disconnect the cables that connect the circuit board.

  4. Oster 6329 Outer Shell Removal: passo 4, immagine 1 di 2 Oster 6329 Outer Shell Removal: passo 4, immagine 2 di 2
    • Disconnect the cable clips from the circuit board using the tweezers to free the outer metal shell from the plastic base.

  5. Oster 6329 Outer Shell Removal: passo 5, immagine 1 di 2 Oster 6329 Outer Shell Removal: passo 5, immagine 2 di 2
    • Lift the top outer metal shell.

    • Carefully lift the outer metal shell at an angle so as not to damage the components in the front of the toaster.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 13-15, Regan Winter 2014 Membro di Cal Poly, Team 13-15, Regan Winter 2014

CPSU-REGAN-W14S13G15

5 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 16

Tutti i Tempi: 1,884