Salta al contenuto principale

Oregon Scientific Meep! X2 Microphone Replacement

Cosa ti serve

  1. Oregon Scientific Meep! X2 Microphone Replacement, Rear Casing: passo 1, immagine 1 di 1
    • Remove the orange covers from the left and right sides of the device by sliding up against the tabs.

  2. Oregon Scientific Meep! X2 Microphone Replacement: passo 2, immagine 1 di 3 Oregon Scientific Meep! X2 Microphone Replacement: passo 2, immagine 2 di 3 Oregon Scientific Meep! X2 Microphone Replacement: passo 2, immagine 3 di 3
    • You can remove the rear casing by unscrewing all six phillips #00(3.5mm x 4.5mm)screws from the left and right side of the device.

  3. Oregon Scientific Meep! X2 Microphone Replacement: passo 3, immagine 1 di 3 Oregon Scientific Meep! X2 Microphone Replacement: passo 3, immagine 2 di 3 Oregon Scientific Meep! X2 Microphone Replacement: passo 3, immagine 3 di 3
    • Use the plastic opening tools to undo the clips around the edges of the device.

  4. Oregon Scientific Meep! X2 Microphone Replacement, Microphone: passo 4, immagine 1 di 2 Oregon Scientific Meep! X2 Microphone Replacement, Microphone: passo 4, immagine 2 di 2
    • Use your tweezers to gently remove the microphone from the slot in the casing.

  5. Oregon Scientific Meep! X2 Microphone Replacement: passo 5, immagine 1 di 2 Oregon Scientific Meep! X2 Microphone Replacement: passo 5, immagine 2 di 2
    • Unsolder the microphone unit from the motherboard using the soldering station.

    • In the case of screen or screen sensor replacement, disregard desoldering steps.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 9-1, Blackwell Winter 2015 Membro di USF Tampa, Team 9-1, Blackwell Winter 2015

USFT-BLACKWELL-W15S9G1

3 Membri

16 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 187