Aggiusta la tua roba Comunità Store

Oregon Scientific Meep! 4.0 Speakers Replacement

Introduzione

By following the steps below, you will be able to remove and replace the speakers of your Oregon Scientific Meep! 4.0.

Cosa ti serve

  1. Oregon Scientific Meep! 4.0 Speakers Replacement, Oregon Scientific Meep! 4.0 Disassembly: passo 1, immagine 1 di 1

    • Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.

    Traduci

  2. Oregon Scientific Meep! 4.0 Speakers Replacement: passo 2, immagine 1 di 1

    • Use a plastic opening tool to detach the clips on the inside of the device.

    Traduci

  4. Oregon Scientific Meep! 4.0 Speakers Replacement, Speakers: passo 3, immagine 1 di 2 Oregon Scientific Meep! 4.0 Speakers Replacement, Speakers: passo 3, immagine 2 di 2

    • Remove the electric tape holding the wires of the speakers in place and gently pull the speakers out of their slots in the device.

    Traduci

  5. Oregon Scientific Meep! 4.0 Speakers Replacement: passo 4, immagine 1 di 2 Oregon Scientific Meep! 4.0 Speakers Replacement: passo 4, immagine 2 di 2

    • Use a soldering station to separate the wires from the speakers.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 158