Aggiusta la tua roba Comunità Store

Orbic Wonder Charging Port Circuit Board Replacement

Cosa ti serve

  1. Orbic Wonder Charging Port Circuit Board Replacement, Battery: passo 1, immagine 1 di 3 Orbic Wonder Charging Port Circuit Board Replacement, Battery: passo 1, immagine 2 di 3 Orbic Wonder Charging Port Circuit Board Replacement, Battery: passo 1, immagine 3 di 3

    • Remove two 2mm TR9 Torx screws from the bottoms of the device.

    Traduci

  2. Orbic Wonder Charging Port Circuit Board Replacement: passo 2, immagine 1 di 3 Orbic Wonder Charging Port Circuit Board Replacement: passo 2, immagine 2 di 3 Orbic Wonder Charging Port Circuit Board Replacement: passo 2, immagine 3 di 3

    • There is a border between the black phone backing and the silver screen.

    • Place the Jimmy in this border, and cautiously torque it back and forth to part the two halves.

    • When the halves are parted correctly, the gap should look like this.

    • Be careful to avoid damaging any connecting circuitry between the two halves.

    Traduci

  3. Orbic Wonder Charging Port Circuit Board Replacement: passo 3, immagine 1 di 3 Orbic Wonder Charging Port Circuit Board Replacement: passo 3, immagine 2 di 3 Orbic Wonder Charging Port Circuit Board Replacement: passo 3, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Anti-Static Wrist Strap
    $7.95
    Compra

    • Before continuing, tighten the anti-static wrist strap around your wrist and connect the alligator clips to a metal portion of the phone.

    • On the upper right side, there is a black ribbon cable in the shape of an “L”. Remove the single 1 mm Phillips #000 screw on the left side of the ribbon cable.

    Traduci

  4. Orbic Wonder Charging Port Circuit Board Replacement: passo 4, immagine 1 di 3 Orbic Wonder Charging Port Circuit Board Replacement: passo 4, immagine 2 di 3 Orbic Wonder Charging Port Circuit Board Replacement: passo 4, immagine 3 di 3

    • Use a pair of angled tweezers to carefully remove the metal casing of the ribbon cable.

    • Use a pair of angled tweezers to detach the black ribbon cable. This is done to unplug the battery.

    Traduci

  6. Orbic Wonder Charging Port Circuit Board Replacement: passo 5, immagine 1 di 3 Orbic Wonder Charging Port Circuit Board Replacement: passo 5, immagine 2 di 3 Orbic Wonder Charging Port Circuit Board Replacement: passo 5, immagine 3 di 3

    • There is a black flap on the bottom of the battery.

    • Using your fingers, pinch this flap and carefully pull the battery up and out of the phone.

    Traduci

  7. Orbic Wonder Charging Port Circuit Board Replacement, Speaker: passo 6, immagine 1 di 3 Orbic Wonder Charging Port Circuit Board Replacement, Speaker: passo 6, immagine 2 di 3 Orbic Wonder Charging Port Circuit Board Replacement, Speaker: passo 6, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Anti-Static Wrist Strap
    $7.95
    Compra

    • Remove the anti-static wrist strap.

    • Use the Phillips #000 screwdriver to remove the five black 2 mm screws.

    • Use the Phillips #000 screwdriver to remove the two grey 2 mm screws.

    Traduci

  8. Orbic Wonder Charging Port Circuit Board Replacement: passo 7, immagine 1 di 2 Orbic Wonder Charging Port Circuit Board Replacement: passo 7, immagine 2 di 2

    • Use a pair of angled tweezers to remove the speaker housing.

    Traduci

  9. Orbic Wonder Charging Port Circuit Board Replacement, Charging Port Circuit Board: passo 8, immagine 1 di 3 Orbic Wonder Charging Port Circuit Board Replacement, Charging Port Circuit Board: passo 8, immagine 2 di 3 Orbic Wonder Charging Port Circuit Board Replacement, Charging Port Circuit Board: passo 8, immagine 3 di 3

    • Detach the metal casing at the bottom of the phone.

    • Unplug the cable connector.

    • Use a pair of angled tweezers to unplug the black wire.

    Traduci

  10. Orbic Wonder Charging Port Circuit Board Replacement: passo 9, immagine 1 di 3 Orbic Wonder Charging Port Circuit Board Replacement: passo 9, immagine 2 di 3 Orbic Wonder Charging Port Circuit Board Replacement: passo 9, immagine 3 di 3

    • Using a pair of angled tweezers, disconnect the connector chip.

    • With the angled tweezers, gently lift (but do not remove) the green circuit board from the phone.

    Traduci

  11. Orbic Wonder Charging Port Circuit Board Replacement: passo 10, immagine 1 di 2 Orbic Wonder Charging Port Circuit Board Replacement: passo 10, immagine 2 di 2

    • Using a pair of angled tweezers, disconnect the attachment to the microphone labeled "JD," and completely remove the circuit board.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 16

Tutti i Tempi: 1,159