Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Oral-B White Pro 1000 Motherboard Replacement

Cosa ti serve

  1. Oral-B White Pro 1000 Motherboard Replacement, Motherboard: passo 1, immagine 1 di 1
    • Remove the brush head by pulling the top away from the base.

  2. Oral-B White Pro 1000 Motherboard Replacement: passo 2, immagine 1 di 3 Oral-B White Pro 1000 Motherboard Replacement: passo 2, immagine 2 di 3 Oral-B White Pro 1000 Motherboard Replacement: passo 2, immagine 3 di 3
    • Pry open the end cap from the toothbrush body.

    • Remove the spring.

  3. Oral-B White Pro 1000 Motherboard Replacement: passo 3, immagine 1 di 2 Oral-B White Pro 1000 Motherboard Replacement: passo 3, immagine 2 di 2
    • Apply pressure on the brush shaft to release the toothbrush internals.

    • Remove the internals through the bottom of the toothbrush body.

  4. Oral-B White Pro 1000 Motherboard Replacement: passo 4, immagine 1 di 2 Oral-B White Pro 1000 Motherboard Replacement: passo 4, immagine 2 di 2
    • Use flat head screwdriver to remove power button pressure plate.

  5. Oral-B White Pro 1000 Motherboard Replacement: passo 5, immagine 1 di 3 Oral-B White Pro 1000 Motherboard Replacement: passo 5, immagine 2 di 3 Oral-B White Pro 1000 Motherboard Replacement: passo 5, immagine 3 di 3
    • Desolder the coil wire from the motherboard.

    • Check out this helpful guide for some soldering and desoldering tips.

    • Squeeze and remove coil from motherboard.

  6. Oral-B White Pro 1000 Motherboard Replacement: passo 6, immagine 1 di 2 Oral-B White Pro 1000 Motherboard Replacement: passo 6, immagine 2 di 2
    • Desolder the motor from motherboard.

    • Remove motherboard and battery from body of toothbrush internals.

  7. Oral-B White Pro 1000 Motherboard Replacement: passo 7, immagine 1 di 2 Oral-B White Pro 1000 Motherboard Replacement: passo 7, immagine 2 di 2
    • Desolder the battery connections from the motherboard.

    • Remove motherboard from battery holder.

Conclusione

Reattach new motherboard and reassemble your device following instructions in reverse order. Solder appropriate connections during reassembly.

Altre 2 persone hanno completato questa guida.

Hannah Parker

Membro da: 11/08/17

203 Reputazione

1 Guida realizzata

Team

IUPUI, Team S5-G4, Baechle Fall 2017 Membro di IUPUI, Team S5-G4, Baechle Fall 2017

IUPUI-BAECHLE-F17S5G4

3 Membri

6 Guide realizzate

Un commento

Motor are brushless?

joseferreira_ms - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 7

Ultimi 7 Giorni: 26

Ultimi 30 Giorni: 61

Tutti i Tempi: 2,551