Optoma HD72 Upper Case Replacement

Introduzione

Use this guide to replace the upper case on an Optoma HD72 projector.

Use a Phillips screwdriver to remove the five 2 mm screws on the underside of the device.

Flip the device over and slightly lift the upper case, with care not to strain the two cables.
Disconnect the two cables that connect the top case to the motherboard.
Lift the upper case up and off.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Membro da: 03/29/22

8.431 Reputazione

42 Guide realizzate

Staff

140 Membri

18.077 Guide realizzate