Aggiusta la tua roba Unisciti alla community Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Optoma HD20 Light Bulb Replacement

Introduzione

Use this guide to remove the light bulb from your Optoma HD20.

Cosa ti serve

  1. Optoma HD20 Light Bulb Replacement, Rear Panel: passo 1, immagine 1 di 2 Optoma HD20 Light Bulb Replacement, Rear Panel: passo 1, immagine 2 di 2

    • Use a Phillips #1 screwdriver to loosen the screws that secure the panel on the bottom of the Optoma HD20.

    Traduci

  2. Optoma HD20 Light Bulb Replacement: passo 2, immagine 1 di 1

    • Lift the panel off of the device.

    Traduci

  3. Optoma HD20 Light Bulb Replacement, Light Bulb Casing: passo 3, immagine 1 di 1

    • Use a Phillips #1 screwdriver to loosen the two screws securing the black casing.

    • The screws don't come out all the way.

    Traduci

  5. Optoma HD20 Light Bulb Replacement: passo 4, immagine 1 di 3 Optoma HD20 Light Bulb Replacement: passo 4, immagine 2 di 3 Optoma HD20 Light Bulb Replacement: passo 4, immagine 3 di 3

    • Remove the light bulb casing from the device.

    • Steps 5-9 are unnecessary if the replacement light bulb comes with housing.

    Traduci

  6. Optoma HD20 Light Bulb Replacement, Light Bulb: passo 5, immagine 1 di 1

    • Remove the three 4.5 mm screws on the light bulb case.

    Traduci

  7. Optoma HD20 Light Bulb Replacement: passo 6, immagine 1 di 1

    • Carefully remove the light bulb insulator from the light bulb casing.

    Traduci

  8. Optoma HD20 Light Bulb Replacement: passo 7, immagine 1 di 1

    • Gently pull the wires off of the pins using tweezers.

    Traduci

  9. Optoma HD20 Light Bulb Replacement: passo 8, immagine 1 di 1

    • Remove the 4 screws on the back of the light bulb casing using a Phillips #1 screwdriver.

    Traduci

  10. Optoma HD20 Light Bulb Replacement: passo 9, immagine 1 di 2 Optoma HD20 Light Bulb Replacement: passo 9, immagine 2 di 2

    • Remove the casing, then gently pull out the old light bulb and replace it with the new one.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

Autore

con 9 altri collaboratori

Trever

Membro da: 01/22/15

1.220 Reputazione

6 Guide realizzate

Distintivi: 20

+17 altri distintivi

Team

Cal Poly, Team 21-23, Maness Winter 2015 Membro di Cal Poly, Team 21-23, Maness Winter 2015

CPSU-MANESS-W15S21G23

4 Membri

6 Guide realizzate

4 Commenti

I recently replaced my bulb for the third time and the insulator had grown brittle I am guessing from the heat and it broke. I can't seem to find this part for sale anywhere. Does anyone know if is possible to purchase it?

Thomas - Replica

The screws in step 8 are extremely hard to get off. I went and bought proper screwdrivers before even attempting since theyre small, but in a day I've only managed to get one off and I'm having to resort to other tactics, even using a drill to just grind the heads off.

dv01_ - Replica

king@okinlamps.com

Need LAD60 20PCS

kingshen92 - Replica

The manual says the new light won’t come back on until a lamp reset I’d done via menu , but how can you see the text if the light isn’t on?????

Taringajohn - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 25

Ultimi 30 Giorni: 87

Tutti i Tempi: 10,585