Salta al contenuto principale

Optical Drive Enclosure Faceplate

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. Optical Drive Enclosure Faceplate, Optical Drive Enclosure Faceplate: passo 1, immagine 1 di 1
    • Remove the three 3.0 mm Phillips screws from the optical bay enclosure.

  2. Optical Drive Enclosure Faceplate: passo 2, immagine 1 di 3 Optical Drive Enclosure Faceplate: passo 2, immagine 2 di 3 Optical Drive Enclosure Faceplate: passo 2, immagine 3 di 3
    • Starting from the left edge, gently pull open the optical bay enclosure.

    • Continue to pull open the two halves of the enclosure until they separate.

  3. Optical Drive Enclosure Faceplate: passo 3, immagine 1 di 1
    • Remove the two 3.0 mm Phillips screws securing the faceplate to the optical bay enclosure.

  4. Optical Drive Enclosure Faceplate: passo 4, immagine 1 di 3 Optical Drive Enclosure Faceplate: passo 4, immagine 2 di 3 Optical Drive Enclosure Faceplate: passo 4, immagine 3 di 3
    • Lift the black plastic faceplate out of the optical bay enclosure.

    • You will no longer need the faceplate or the two Phillips screws that held it in place. Set those parts aside if you ever wish to put the faceplate back into the enclosure.

    • Reassemble the optical bay enclosure without the faceplate, reusing the original three 3.0 mm Phillips screws to keep it intact.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Brittany McCrigler

Membro da: 03/05/12

89.014 Reputazione

131 Guide realizzate

Team

iFixit Membro di iFixit

Staff

135 Membri

16.817 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 724