Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide off the case to expose the internal components of the receiver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently wedge a small screwdriver in between one side of the fuse and the contact.
-
Remove the fuse with your thumb and forefinger.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Examine the fuse. If the wire within it is broken, you will need to replace it with a new 125 Volt, 4 Amp fuse.
-
Annulla: non ho completato questa guida.
Altre 5 persone hanno completato questa guida.
2 Commenti
Thanks for clear instructions!