Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

OnePlus 6T Speaker Replacement

Scritto Da: Quinn Jones (e 3 altri collaboratori)
  • Commenti: 0
  • Preferiti: 0
  • Completamenti: 2

Difficoltà

Moderato

Passi

6

Tempo Necessario

15 - 20 minuti

Sezioni

2

Contrassegni

1

Better Introduction

Introduzione Migliore

Migliora questa guida completando o revisionando la sua introduzione.

Introduzione

If the audio coming from your OnePlus 6T speakers sounds distorted and troubleshooting doesn’t work, you may need to replace your speakers.

  1. Make sure the phone is powered off and placed with the back cover facing towards you on a stable surface.

    • Make sure the phone is powered off and placed with the back cover facing towards you on a stable surface.

    Modifica

  2. Pop open the SIM card tray by inserting a SIM card removal tool into a small hole on the upper-left side of the phone.

    • Pop open the SIM card tray by inserting a SIM card removal tool into a small hole on the upper-left side of the phone.

    • Carefully remove the SIM card from its tray.

    Modifica

  3. Kit per Nintendo Switch

    Una soluzione rapida per tornare in gioco

    Acquista Kit per Switch

    Kit per Nintendo Switch

    Una soluzione rapida per tornare in gioco

    Acquista Kit per Switch

  4. Loosen the binding glue within the phone using a hairdryer or an iOpener.

    • Loosen the binding glue within the phone using a hairdryer or an iOpener.

    • If you choose to use a hairdryer, hold the dryer at least eight inches from the phone and apply heat for two minutes in a circular motion around the edges of the phone.

    Modifica

  5. Insert a Jimmy under one of the heated corners of the phone to lift it slightly. Insert a plastic card underneath the slightly lifted lip on the back cover and gently glide the card under the lifted phone casing. There will be a small amount of tension, but this is normal as the card is removing the adhesive within the phone.

    • Insert a Jimmy under one of the heated corners of the phone to lift it slightly.

    • Insert a plastic card underneath the slightly lifted lip on the back cover and gently glide the card under the lifted phone casing.

    • There will be a small amount of tension, but this is normal as the card is removing the adhesive within the phone.

    • Remove the back cover from the phone.

    Modifica

  6. Remove seven 3mm Phillips #00 screws from the speaker.

    • Remove seven 3mm Phillips #00 screws from the speaker.

    Modifica

  7. Use a spudger to lift and remove the speaker.

    • Use a spudger to lift and remove the speaker.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 17

Ultimi 30 Giorni: 62

Tutti i Tempi: 494