Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

Use this guide to replace a broken or cracked OnePlus 6T Front Camera.

  1. Make sure the phone is powered off and placed with the back cover facing towards you on a stable surface.
    • Make sure the phone is powered off and placed with the back cover facing towards you on a stable surface.

  2. Pop open the SIM card tray by inserting a SIM card removal tool into a small hole on the upper-left side of the phone.
    • Pop open the SIM card tray by inserting a SIM card removal tool into a small hole on the upper-left side of the phone.

    • Carefully remove the SIM card from its tray.

  3. Loosen the binding glue within the phone using a hairdryer or an iOpener.
    • Loosen the binding glue within the phone using a hairdryer or an iOpener.

    • If you choose to use a hairdryer, hold the dryer at least eight inches from the phone and apply heat for two minutes in a circular motion around the edges of the phone.

  4. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  5. Insert a Jimmy under one of the heated corners of the phone to lift it slightly. Insert a plastic card underneath the slightly lifted lip on the back cover and gently glide the card under the lifted phone casing. There will be a small amount of tension, but this is normal as the card is removing the adhesive within the phone.
    • Insert a Jimmy under one of the heated corners of the phone to lift it slightly.

    • Insert a plastic card underneath the slightly lifted lip on the back cover and gently glide the card under the lifted phone casing.

    • There will be a small amount of tension, but this is normal as the card is removing the adhesive within the phone.

    • Remove the back cover from the phone.

  6. Remove the single 3mm Phillips #00 screws holding the metal battery cover on the phone. Use tweezers to remove the battery cover and place it to the side.
    • Remove the single 3mm Phillips #00 screws holding the metal battery cover on the phone.

    • Use tweezers to remove the battery cover and place it to the side.

  7. Remove eight 3mm Phillips #00 screws that connect the midframe to the phone.
    • Remove eight 3mm Phillips #00 screws that connect the midframe to the phone.

  8. Using a spudger, gently remove the midframe and place it to the side.
    • Using a spudger, gently remove the midframe and place it to the side.

  9. Using a spudger, lift the light brown tab in the middle of phone to disconnect the front camera.
    • Using a spudger, lift the light brown tab in the middle of phone to disconnect the front camera.

    • Remove the front camera from the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Kristen Gismondi

Membro da: 12/11/2014

35.237 Reputazione

60 Guide realizzate

Team

iFixit Membro di iFixit

Community

125 Membri

11.821 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 20

Tutti i Tempi: 135