Salta al contenuto principale

One Education Infinity:One Motherboard Replacement

Cosa ti serve

  1. One Education Infinity:One Motherboard Replacement, Battery: passo 1, immagine 1 di 2 One Education Infinity:One Motherboard Replacement, Battery: passo 1, immagine 2 di 2
    • Use a spudger to disconnect the black bundled cable connector from the motherboard.

  2. One Education Infinity:One Motherboard Replacement: passo 2, immagine 1 di 3 One Education Infinity:One Motherboard Replacement: passo 2, immagine 2 di 3 One Education Infinity:One Motherboard Replacement: passo 2, immagine 3 di 3
    • Use a spudger to lift the black tab on top of the ZIF connector.

    • Slide the ribbon cable out of the connector.

  3. One Education Infinity:One Motherboard Replacement: passo 3, immagine 1 di 3 One Education Infinity:One Motherboard Replacement: passo 3, immagine 2 di 3 One Education Infinity:One Motherboard Replacement: passo 3, immagine 3 di 3
    • Use a spudger to flip up the black retaining flap on the ZIF connector.

    • Pull the folded ribbon cable straight out of the connector.

    • This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

  4. One Education Infinity:One Motherboard Replacement: passo 4, immagine 1 di 1
    • Use a spudger to pry the battery away from the device.

    • Always use ESD safe tools when working with delicate electrical components.

  5. One Education Infinity:One Motherboard Replacement, Antenna: passo 5, immagine 1 di 2 One Education Infinity:One Motherboard Replacement, Antenna: passo 5, immagine 2 di 2
    • Use ESD safe tweezers to disconnect the antenna from the motherboard.

  6. One Education Infinity:One Motherboard Replacement, Motherboard: passo 6, immagine 1 di 3 One Education Infinity:One Motherboard Replacement, Motherboard: passo 6, immagine 2 di 3 One Education Infinity:One Motherboard Replacement, Motherboard: passo 6, immagine 3 di 3
    • Use a spudger to flip up the black flap on the camera's ZIF connector.

    • Pull the ribbon cable straight out of the connector.

  7. One Education Infinity:One Motherboard Replacement: passo 7, immagine 1 di 1
    • Use tweezers to pull the dock connection cable away from the motherboard.

  8. One Education Infinity:One Motherboard Replacement: passo 8, immagine 1 di 1
    • Use a Phillips #00 screwdriver to unscrew the two 3.4 mm screws.

    • Use a Phillips #000 screwdriver to unscrew the one 4.2mm screw.

  9. One Education Infinity:One Motherboard Replacement: passo 9, immagine 1 di 1
    • Lift the protective shield away from the motherboard.

  10. One Education Infinity:One Motherboard Replacement: passo 10, immagine 1 di 3 One Education Infinity:One Motherboard Replacement: passo 10, immagine 2 di 3 One Education Infinity:One Motherboard Replacement: passo 10, immagine 3 di 3
    • With the flat end of a spudger, flip up the black flap on the display's ZIF connector.

    • Insert the pointed end of the spudger between the cable and the motherboard and gently pull the cable straight out of the connector.

    • During reassembly, be sure to insert the cable into the connector up to the white line on the cable and then close the retaining flap.

  11. One Education Infinity:One Motherboard Replacement: passo 11, immagine 1 di 1
    • Gently lift the motherboard away from the display assembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Taylor Bratsch

Membro da: 09/06/16

5.730 Reputazione

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 9

Tutti i Tempi: 487