Aggiusta la tua roba Comunità Store

Onda V701 Front- Facing Camera Replacement

Introduzione

This guide will show you how to replace the front facing-camera assembly of the Onda V701. The front facing-camera is the only camera on the device and replacing it is a very easy process.

Cosa ti serve

  1. Onda V701 Front- Facing Camera Replacement, Back Panel: passo 1, immagine 1 di 3 Onda V701 Front- Facing Camera Replacement, Back Panel: passo 1, immagine 2 di 3 Onda V701 Front- Facing Camera Replacement, Back Panel: passo 1, immagine 3 di 3

    • Ensure device is powered off before disassembly.

    • Remove the 4 rubber screw plugs using a spudger.

    Modifica

  2. Onda V701 Front- Facing Camera Replacement: passo 2, immagine 1 di 3 Onda V701 Front- Facing Camera Replacement: passo 2, immagine 2 di 3 Onda V701 Front- Facing Camera Replacement: passo 2, immagine 3 di 3

    • Remove the four 4.8mm mounting screws using a PH00 screwdriver.

    Modifica

  3. Onda V701 Front- Facing Camera Replacement: passo 3, immagine 1 di 2 Onda V701 Front- Facing Camera Replacement: passo 3, immagine 2 di 2

    • Starting at one corner, gently pry the back panel assembly from the screen assembly using two plastic opening tools.

    • Slide the opening tools around the perimeter of the device to separate the back panel assembly from the screen assembly.

    Modifica

  5. Onda V701 Front- Facing Camera Replacement: passo 4, immagine 1 di 2 Onda V701 Front- Facing Camera Replacement: passo 4, immagine 2 di 2

    • Gently lift the screen assembly away from the back cover assembly.

    • Be careful when separating the two pieces as the screen assembly is still connected to the mother board by two ribbon cables.

    Modifica

  6. Onda V701 Front- Facing Camera Replacement: passo 5, immagine 1 di 3 Onda V701 Front- Facing Camera Replacement: passo 5, immagine 2 di 3 Onda V701 Front- Facing Camera Replacement: passo 5, immagine 3 di 3

    • Disconnect the two ribbon connectors by flipping the gray tabs up with a fingernail or a spudger.

    • Remove the ribbon cables.

    Modifica

  7. Onda V701 Front- Facing Camera Replacement, Front- Facing Camera: passo 6, immagine 1 di 2 Onda V701 Front- Facing Camera Replacement, Front- Facing Camera: passo 6, immagine 2 di 2

    • Gently pry the front-facing camera away from the back panel using a spudger.

    Modifica

  8. Onda V701 Front- Facing Camera Replacement: passo 7, immagine 1 di 2 Onda V701 Front- Facing Camera Replacement: passo 7, immagine 2 di 2

    • Flip the gray locking tab of the ribbon connector up using a spudger.

    • Remove the ribbon cable from the connector.

    Modifica

  9. Onda V701 Front- Facing Camera Replacement: passo 8, immagine 1 di 1

    • Remove the front-facing camera assembly.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 5

Tutti i Tempi: 251